2026-09-21T17:18:06Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/92592022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131023
Mary C. Boyce.
Parsons, Ethan M. (Ethan Moore), 1972-
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2005-08-22T23:53:40Z
2005-08-22T23:53:40Z
2000
2000
http://hdl.handle.net/1721.1/9259
45587448
Includes bibliographical references (leaves 165-167).
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2000.
The abrasive wear of unfilled and fiber-filled elastomers was studied both with experiments and with finite element simulations. Wear experiments with elastomer seals exhibited two distinct regimes: an initial, "break-in" period followed by an "aggressive wear" period. During the break-in period, few abrasive particles are able to penetrate the seal's contact band, and no substantial seal wear occurs. During the aggressive wear period, abrasive particles aggregate into distinct clusters which advance at a linear rate and abrasively wear the seal. Filled elastomer seals were shown to have break-in periods significantly longer than those of unfilled elastomer seals. The aggressive wear rates and mechanisms of filled and unfilled elastomer seals were determined to be virtually identical. Abrasion patterns typical of the abrasive wear of elastomers were observed. Micromechanical modeling of the abrasive wear of unfilled elastomers predicted the formation of the observed abrasion patterns. Modeling of fiber-filled elastomers indicated that fibers should have no effect on the aggressive wear process. Additional modeling of fiber-filled elastomers suggested several mechanisms by which the fibers might extend the break-in period of the seal. Seal wear experiments with well-defined slurries offered strong evidence that the fibers extend the break-in period of the seal by inhibiting particle ingestion and cluster formation. A seal lip surface geometry is proposed to simulate the effect of the fibers.
by Ethan M. Parsons.
S.M.
167 leaves
13743562 bytes
13743321 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Micromechanics of deformation and abrasive wear of fiber-filled elastomers
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="0b80eaa4-f56d-44cb-afe3-27bbe1665011">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Micromechanics of deformation and abrasive wear of fiber-filled elastomers</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2000</PublicationDate>
<Authors>
<Author>
<DisplayName>Parsons, Ethan M. (Ethan Moore), 1972-</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>The abrasive wear of unfilled and fiber-filled elastomers was studied both with experiments and with finite element simulations. Wear experiments with elastomer seals exhibited two distinct regimes: an initial, "break-in" period followed by an "aggressive wear" period. During the break-in period, few abrasive particles are able to penetrate the seal's contact band, and no substantial seal wear occurs. During the aggressive wear period, abrasive particles aggregate into distinct clusters which advance at a linear rate and abrasively wear the seal. Filled elastomer seals were shown to have break-in periods significantly longer than those of unfilled elastomer seals. The aggressive wear rates and mechanisms of filled and unfilled elastomer seals were determined to be virtually identical. Abrasion patterns typical of the abrasive wear of elastomers were observed. Micromechanical modeling of the abrasive wear of unfilled elastomers predicted the formation of the observed abrasion patterns. Modeling of fiber-filled elastomers indicated that fibers should have no effect on the aggressive wear process. Additional modeling of fiber-filled elastomers suggested several mechanisms by which the fibers might extend the break-in period of the seal. Seal wear experiments with well-defined slurries offered strong evidence that the fibers extend the break-in period of the seal by inhibiting particle ingestion and cluster formation. A seal lip surface geometry is proposed to simulate the effect of the fibers.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>