2026-09-27T18:42:08Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/93572022-01-13T07:54:36Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Kevin N. Otto.
Tapia, Carlos (Carlos Francisco), 1976-
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2005-08-22T20:34:16Z
2005-08-22T20:34:16Z
1999
1999
http://hdl.handle.net/1721.1/9357
44488741
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1999.
Includes bibliographical references (leaf 35).
The economic success of a company depends on its ability to produce products that satisfy the needs of a wide variety of consumers. These products have to be produced in a cost-effective manner. One approach to this problem is the creation of product families based on a platform architecture. A platform architecture is the set of selection and configuration choices shared among multiple products. This thesis presents a method for designing product platforms that takes into consideration both the performance requirements as well as the cost of the product family. The method is used to identify possible subsystems of each product that could be made common to all products in the family and become part of the platform.
by Carlos Tapia.
S.B.
35 leaves
2476271 bytes
2476032 bytes
application/pdf
application/pdf
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
A method for defining the requirements of a product platform
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="5bafb9df-a817-41cb-9ca1-e22c42a25e94">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>A method for defining the requirements of a product platform</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>1999</PublicationDate>
<Authors>
<Author>
<DisplayName>Tapia, Carlos (Carlos Francisco), 1976-</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>The economic success of a company depends on its ability to produce products that satisfy the needs of a wide variety of consumers. These products have to be produced in a cost-effective manner. One approach to this problem is the creation of product families based on a platform architecture. A platform architecture is the set of selection and configuration choices shared among multiple products. This thesis presents a method for designing product platforms that takes into consideration both the performance requirements as well as the cost of the product family. The method is used to identify possible subsystems of each product that could be made common to all products in the family and become part of the platform.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>