2026-09-20T20:26:21Zhttps://dspace.mit.edu/server/oai/requestoai:dspace.mit.edu:1721.1/987582022-01-13T07:54:05Zcom_1721.1_7582com_1721.1_7581col_1721.1_131024
Lallit Anand.
Valero, Diana (Diana E.)
Massachusetts Institute of Technology. Department of Mechanical Engineering.
Massachusetts Institute of Technology. Department of Mechanical Engineering
2015-09-17T19:10:05Z
2015-09-17T19:10:05Z
2015
2015
http://hdl.handle.net/1721.1/98758
920899367
Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2015.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 26).
Double network hydrogel samples were synthesized and manufactured out of polyacrylamide (PAAm) and alginate solutions. They were casted into cube molds with each side measuring 20 mm. Samples were tested under compressive loads in cyclic compression tests and stress relaxation tests. A viscoelastic model was applied and material properties were calculated using the experimental data. The elastic modulus of these PAAm-alginate gels was found to be 35kPa, while the viscosity, [eta], was found to be 1.43 kPa-s. The viscous response was found to have a dependency on the strain rate by an exponential factor of 0.26. Using the applied theoretical model and the experimentally determined material properties, you can then characterize the mechanical response of the PAAm-alginate hydrogel when it undergoes small strains.
by Diana Valero.
S.B.
26 pages
eng
Massachusetts Institute of Technology
M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
http://dspace.mit.edu/handle/1721.1/7582
Mechanical Engineering.
Compression testing and measurement of material properties of a double network hydrogel
Thesis
application/pdf
false
Publication
unknown
unknown
<Publication xmlns="https://www.openaire.eu/cerif-profile/1.1/" id="d9920fef-6f0e-41d2-afce-654a39e6de64">
<Type xmlns="https://www.openaire.eu/cerif-profile/vocab/COAR_Publication_Types">http://purl.org/coar/resource_type/c_1843</Type>
<Language>eng</Language>
<Title>Compression testing and measurement of material properties of a double network hydrogel</Title>
<PublishedIn>
<Publication>
</Publication>
</PublishedIn>
<PublicationDate>2015</PublicationDate>
<Authors>
<Author>
<DisplayName>Valero, Diana (Diana E.)</DisplayName>
<Affiliation>
<OrgUnit>
</OrgUnit>
</Affiliation>
</Author>
</Authors>
<Editors>
</Editors>
<Publishers>
<Publisher>
<DisplayName>Massachusetts Institute of Technology</DisplayName>
<OrgUnit />
</Publisher>
</Publishers>
<License>http://dspace.mit.edu/handle/1721.1/7582</License>
<Keyword>Mechanical Engineering.</Keyword>
<Abstract>Double network hydrogel samples were synthesized and manufactured out of polyacrylamide (PAAm) and alginate solutions. They were casted into cube molds with each side measuring 20 mm. Samples were tested under compressive loads in cyclic compression tests and stress relaxation tests. A viscoelastic model was applied and material properties were calculated using the experimental data. The elastic modulus of these PAAm-alginate gels was found to be 35kPa, while the viscosity, [eta], was found to be 1.43 kPa-s. The viscous response was found to have a dependency on the strain rate by an exponential factor of 0.26. Using the applied theoretical model and the experimentally determined material properties, you can then characterize the mechanical response of the PAAm-alginate hydrogel when it undergoes small strains.</Abstract>
<Access xmlns="http://purl.org/coar/access_right"
>
</Access>
</Publication>