Show simple item record

dc.contributor.advisorQiqi Wang.en_US
dc.contributor.authorTalnikar, Chaitanya Anil.en_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Aeronautics and Astronautics.en_US
dc.date.accessioned2019-02-14T15:50:25Z
dc.date.available2019-02-14T15:50:25Z
dc.date.copyright2018en_US
dc.date.issued2018en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/120425en_US
dc.descriptionThis electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.en_US
dc.descriptionThesis: Ph. D. in Computational Science and Engineering, Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, 2018en_US
dc.descriptionCataloged from PDF version of thesis.en_US
dc.descriptionIncludes bibliographical references (pages 187-195).en_US
dc.description.abstractDesign optimization methods are a popular tool in computational fluid dynamics for designing components or finalizing the flow parameters of a system. The adjoint method accelerates the design process by providing gradients of the design objective with respect to the system parameters. But, typically, adjoint-based design optimization methods have used low fidelity simulations like Reynolds Averaged Navier-Stokes (RANS). To reliably capture the complex flow phenomena like turbulent boundary layers, turbulent wakes and fluid separation involved in high Reynolds number flows, high fidelity simulations like large eddy simulation (LES) are required. Unfortunately, due to the chaotic dynamics of turbulence, the adjoint method for LES diverges and produces incorrect gradients. In this thesis, the adjoint method for unsteady flow equations is modified by adding artificial viscosity to the adjoint equations. The additional viscosity stabilizes the adjoint solution and maintains reasonable accuracy of the gradients obtained from it. The accuracy of the method is assessed on multiple turbulent flow problems, including subsonic flow over a cylinder and transonic flow over a gas turbine vane. The utility of the method is then tested in performing shape optimization of the trailing edge of a transonic turbine vane. The optimal design, found using a modified gradient-based Bayesian optimization algorithm, shows approximately 15% better aero-thermal performance than the baseline design. Such design optimizations are possible due to the availability of massively parallel supercomputers. Designing high performance fluid flow solvers for the next generation supercomputers is a challenging task. In this thesis, a two-level computational graph method for writing optimized distributed flow solvers on heterogeneous architectures is presented. A checkpoint-based automatic differentiation method is used to derive the corresponding adjoint flow solver in this framework.en_US
dc.description.statementofresponsibilityby Chaitanya Anil Talnikar.en_US
dc.format.extent195 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsMIT theses are protected by copyright. They may be viewed, downloaded, or printed from this source but further reproduction or distribution in any format is prohibited without written permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectAeronautics and Astronautics.en_US
dc.titleViscosity stabilized adjoint method for unsteady compressible Navier-Stokes equationsen_US
dc.typeThesisen_US
dc.description.degreePh. D. in Computational Science and Engineeringen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Aeronautics and Astronauticsen_US
dc.identifier.oclc1084479705en_US
dc.description.collectionPh.D.inComputationalScienceandEngineering Massachusetts Institute of Technology, Department of Aeronautics and Astronauticsen_US
dspace.imported2019-06-17T20:55:22Zen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record