dc.contributor.advisor | Roy E. Welsch and Thomas W. Eagar. | en_US |
dc.contributor.author | González, Carlos A. (Carlos Alberto), 1972- | en_US |
dc.contributor.other | Leaders for Manufacturing Program. | en_US |
dc.date.accessioned | 2006-11-08T16:34:28Z | |
dc.date.available | 2006-11-08T16:34:28Z | |
dc.date.copyright | 2004 | en_US |
dc.date.issued | 2004 | en_US |
dc.identifier.uri | http://hdl.handle.net/1721.1/34766 | |
dc.description | Thesis (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering; in conjunction with the Leaders for Manufacturing Program at MIT, 2004. | en_US |
dc.description | Includes bibliographical references (p. 49). | en_US |
dc.description.abstract | For this study, a novel wire inspection system was developed to detect surface defects and monitor diameter real-time during the final wire drawing operation. Throughout his work, it was proven that the new inspection system was able to catch common wire defects under manufacturing conditions (wire speed). Furthermore, defect density limits were defined based on data collected during this study. A production version of the wire inspection system was jointly developed with the equipment supplier and an order was placed for three complete systems to be installed in all final draw machines. Increased competition and poor economic conditions forced the manufacturer to place an unprecedented focus on decreasing manufacturing costs. The wire inspection system reported in this thesis was developed with the objective of increasing productivity at the most critical operation in the factory; final wire drawing. | en_US |
dc.description.statementofresponsibility | by Carlos A. González. | en_US |
dc.format.extent | 53 p. | en_US |
dc.format.extent | 2915762 bytes | |
dc.format.extent | 2915568 bytes | |
dc.format.mimetype | application/pdf | |
dc.format.mimetype | application/pdf | |
dc.language.iso | eng | en_US |
dc.publisher | Massachusetts Institute of Technology | en_US |
dc.rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. | en_US |
dc.rights.uri | http://dspace.mit.edu/handle/1721.1/7582 | |
dc.subject | Sloan School of Management. | en_US |
dc.subject | Mechanical Engineering. | en_US |
dc.subject | Leaders for Manufacturing Program. | en_US |
dc.title | Addressing equipment set-up time and manufacturing cost through real time inline inspection in tantalum wire manufacturing | en_US |
dc.type | Thesis | en_US |
dc.description.degree | S.M. | en_US |
dc.description.degree | M.B.A. | en_US |
dc.contributor.department | Leaders for Manufacturing Program at MIT | en_US |
dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | |
dc.contributor.department | Sloan School of Management | |
dc.identifier.oclc | 56714603 | en_US |