Show simple item record

dc.contributor.advisorJohn T. Germaine.en_US
dc.contributor.authorMoniz, Safia Ren_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Civil and Environmental Engineering.en_US
dc.coverage.spatialn-us-maen_US
dc.date.accessioned2010-03-25T14:56:44Z
dc.date.available2010-03-25T14:56:44Z
dc.date.copyright2009en_US
dc.date.issued2009en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/53072
dc.descriptionThesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2009.en_US
dc.descriptionIncludes bibliographical references (leaves 63-64).en_US
dc.description.abstractThe ability to accurately determine the undrained shear strength of cohesive soil is of particular importance to the practice of geotechnical engineering. Ladd & Foot (1974) presents a method to determine the undrained shear strength based on the concept of normalized soil parameters; called the SHANSEP (Stress History and Normalized Soil Engineering Properties) method. Recent research at MIT has discovered a consistant variation of undrained shear parameters during triaxial compression. Undrained triaxial compression tests on RBBC (Resedimented Boston Blue Clay) have shown that the soil stiffness and strength is dependant on the vertical consolidation effective stress and that the strength behaviour does not strictly conform to a normalized framework. The aim of this study is to explore the trend between vertical consolidation stress and the undrained shear strength behaviour in extension for cohesive soils to determine whether the normalized soil parameter concept (and hence SHANSEP) is still applicable at vertical consolidation stresses ranges of [sigma]'v 2 =/>10 ksc (1.OMPa). To do this, a series of Ko-consolidated undrained triaxial extension tests were performed at vertical consolidation consolidation stresses ranging from 1.5 ksc (0.15 MPa) to 20 ksc (2.0MPa). Results from these tests clearly show that the undrained shear strength decreases with vertical effective stress. The undrained shear strengths decreased from 0.17 ksc to 0.15 ksc, and the friction angle decreased from 45° to 31.1° corresponding to an increase in vertical consolidation stress level.en_US
dc.description.abstract(cont.) The results also show that the maximum secant modulus (Emax) was found to decrease exponentially with the vertical consolidation effective stress ([sigma]'vc) according to the equation: Emax = 450 x [sigma]'vc 0.74 This relationship was proposed by Santagata (1999) and was presented as: Emax [alpha] [sigma]'vc 0.74. There is not any apparent relationship between the lateral stress ratio and the vertical consolidation stress. The trends observed during shear in extension are consistent with observations made during Ko consolidation compression testing.en_US
dc.description.statementofresponsibilityby Safia R. Moniz.en_US
dc.format.extent68 leavesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectCivil and Environmental Engineering.en_US
dc.titleThe influence of effective consolidation stress on the normalized extension strength properties of resedimented Boston blue clayen_US
dc.typeThesisen_US
dc.description.degreeM.Eng.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Civil and Environmental Engineering
dc.identifier.oclc501946094en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record