Show simple item record

dc.contributor.advisorBilge Yildiz.en_US
dc.contributor.authorChen, Yan, 1976-en_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Nuclear Science and Engineering.en_US
dc.date.accessioned2014-12-08T18:49:08Z
dc.date.available2014-12-08T18:49:08Z
dc.date.copyright2014en_US
dc.date.issued2014en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/92103
dc.descriptionThesis: Ph. D., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, 2014.en_US
dc.descriptionCataloged from PDF version of thesis.en_US
dc.descriptionIncludes bibliographical references (pages 157-172).en_US
dc.description.abstractThe objective is to understand the origin of the local oxygen reduction reaction (ORR) activity on the basis of the local electronic structure at the surface of transition metal oxides at elevated temperatures and in oxygen gas. This goal presents a key challenge to traditional surface science approaches, and is important for enabling high performance electrochemical energy conversion and storage systems, such as fuel cells, batteries, super-capacitors. Firstly, this thesis identified the correlation between the surface chemistry and electronic structure on SrTi1Fe,03 (STF), as a model perovskite oxide. Angleresolved x-ray photoelectron spectroscopy showed that that Sr enrichment increases on the STF thin films with increasing Fe content. In situ scanning tunneling microscopy and spectroscopy (STM/STS) demonstrated that the apparent energy gap increases with Fe fraction. This trend is opposite to the dependence of the bulk STF band gap on Fe fraction and is attributed to the formation of SrO that deteriorates oxygen reduction kinetics. The second case study in this thesis aimed to obtain a microscopic level understanding and control of the vastly faster ORR kinetics near the La0.8Sr0.2CoO 3/(La0.5Sro. 5 )2CoO 4 (LSC113/214) hetero-interfaces. We implemented a novel combination of in-situ STM/STS and focused ion beam milling to probe the local electronic structure at nanometer resolution in model multilayer superlattices. At 200-300 °C, the LSC2 14 layers are electronically activated through an interfacial coupling with LSC113 . Such electronic activation is expected to facilitate charge transfer to oxygen and enable enhanced reactivity near the LSC113 214 interfaces. Our results contribute to an improved understanding of oxide hetero-interfaces at elevated temperatures and identify electronically coupled oxide structures as the basis of novel cathodes. This thesis was then able to explain the mechanism behind the electronic activation of LSC2 14 by the neighboring LSC113 at high temperatures based on the exchange of electron and oxygen defects across the interfaces, by performing hard xray photoelectron spectroscopy and high resolution X-ray diffraction measurements. Lastly, a vertically aligned nano-composite structure made of LSCU324 was successful synthesized by the combinatorial pulsed laser deposition and was tested as a novel SOFC cathode.en_US
dc.description.statementofresponsibilityby Yan Chen.en_US
dc.format.extent172 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectNuclear Science and Engineering.en_US
dc.titleElectronic structure of perovskite oxide surfaces at elevated temperatures and its correlation with oxygen reduction reactivityen_US
dc.typeThesisen_US
dc.description.degreePh. D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Nuclear Science and Engineering
dc.identifier.oclc895833768en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record