Show simple item record

dc.contributor.advisorHarold F. Hemond.en_US
dc.contributor.authorSenft-Grupp, Schuyleren_US
dc.contributor.otherMassachusetts Institute of Technology. Department of Civil and Environmental Engineering.en_US
dc.date.accessioned2015-07-17T19:47:28Z
dc.date.available2015-07-17T19:47:28Z
dc.date.copyright2015en_US
dc.date.issued2015en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/97796
dc.descriptionThesis: Ph. D., Massachusetts Institute of Technology, Department of Civil and Environmental Engineering, 2015.en_US
dc.descriptionCataloged from PDF version of thesis.en_US
dc.descriptionIncludes bibliographical references.en_US
dc.description.abstractThe development of three optical instruments for the chemical exploration and characterization of natural waters is described. The first instrument (called LEDIF) employs a novel flowcell, 6 UV LEDs as excitation sources, a wideband lamp, and a spectrometer to measure steady state chemical fluorescence and absorbance. The instrument is packaged aboard an autonomous underwater vehicle (AUV) and demonstrates the ability to map chemical concentrations in three dimensions. The second instrument repackages the sensor components to study dissolved organic matter (DOM) in tropical Southeast Asia peatland rainforests. This instrument is optimized for low power consumption over long deployments to remote locations. Two field trials in Pontianak Indonesia with durations of two and six weeks captured peatland river fluorescence measurements at 20 minute intervals. The results show changes in DOM linked to tidally induced water level fluctuations and provide insight into the complex biogeochemical dynamics of the system. The third instrument increases the chemical sensitivity and specificity of LEDIF with the addition of fluorescence lifetime sensing capabilities. The development of this sensor for AUV deployment required the engineering of a compact, low power, high speed (GHz) data acquisition circuit board. The resulting circuit digitizes data at a rate of 1 gigasample/second and performs user customizable digital signal processing. This board is used along with a 266 nm Q-switch laser, fast photomultiplier tube (PMT), and computer controlled monochromator to build a small fluorescence lifetime instrument. The instrument is tested with solutions of low concentration pyrene to demonstrate its ability to identify small, long-lived fluorescence signals in the presence of large background fluorescence. Results indicate a pyrene limit of detection below environmentally relevant levels. The final overall instrument dimensions allows it to be packaged for future AUV deploymentsen_US
dc.description.statementofresponsibilityby Schuyler Senft-Grupp.en_US
dc.format.extent173 pagesen_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectCivil and Environmental Engineering.en_US
dc.titleThe development of steady State and lifetime fluorescence instruments for real time in situ aquatic chemistry measurementsen_US
dc.typeThesisen_US
dc.description.degreePh. D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Civil and Environmental Engineering
dc.identifier.oclc911928693en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record