|
|
|
|
1 |
|
|
|
Shear and Bending
-
Lecture 1: Shear and Bending (PDF)
-
|
|
|
|
|
|
|
|
|
2 |
|
|
|
Characteristics of Thin Walled Sections
-
Lecture 3: Bending Without Twist (PDF)
-
Lecture 4: Pure Twist Open Section (PDF)
-
Lecture 5: Pure Twist Closed Section (PDF)
-
Lecture 6: Pure and Warping Torsion (PDF)
-
Lecture 7: Calculation Of Section Properties - Open (PDF)
[This consists of four parts (and how we will treat each) (suggest printing at most pages 1-9)
A - derivation of geometric algorithms for section properties (cover quickly for sense of approach)
B - derivation of first moment approach (for info - not covered)
C - computational routine resulting from A (demo a few examples - routine available in lab)
D - computational routine resulting from B (routine available in lab)]
-
Lecture 7a: Calculation of Section Properties Closed (PDF)
-
Lecture 8: Shear Center - Closed Section (PDF)
Includes example problem.
-
Lecture 8a: Shear Stress Multicell Section (PDF)
Example problem separate.
-
Lecture 8b: St. Venant Torsion Multi-cell (PDF)
-
Lecture 9a: Composite Sections (PDF)
One of three minor topics.
-
Lecture 9b: Shear Lag (PDF)
Second of three minor topics.
-
Lecture 9c: Yield Criteria (PDF)
|
|
|
|
|
|
|
|
|
3 |
|
|
|
Design Approach and Failure Analysis
-
Design Philosophy and Approach (PDF)
-
Loads and Design Approach continued (PDF)
|
|
|
|
|
|
|
|
|
4 |
|
|
|
Plate Bending
-
Plate Bending Introduction (PDF)
-
-
Plate Bending Solution (PDF)
|
|
|
|
|
|
|
|
|
5 |
|
|
|
Panel, Girder, Frame Bending Failure Analysis
- Panel, Girder and Frame Limit States (PDF)
|
|
|
|
|
|
|
|
|
6 |
|
|
|
Buckling and Ultimate Strength of Columns
- Buckling (PDF)
Overview of column buckling leading to CCB and GCCP failure criteria.
|
|
|
|
|
|
|
|
|
7 |
|
|
|
Buckling and Ultimate Strength of Plates
- Plate Buckling (PDF)
PFLB.
|
|
|
|
|
|
|
|
|
8 |
|
|
|
Buckling of Stiffened Panels
- Buckling of Stiffened Panels (PDF)
PCCB and PCSB.
|
|
|
|
|
|
|
|
|
9 |
|
|
|
Ultimate Strength of Stiffened Panels
- Ultimate Strength of Stiffened Panels (PDF)
PCSF Modes I, II, III.
|
|
|
|
|
|
|
|
|
10 |
|
|
|
Matrix, Grillage and FEM Analysis
- Intro to Matrix Analysis (PDF)
[Summary of Chapter 1 from Zienkiewicz -- The Finite Element Method, any of five editions.]
- Matrix Analysis continued (PDF)
[Section 5.2 of Hughes.]
- Pin-jointed Beam Example (PDF)
[Example from Hughes page 191 ff.]
- Flexure Only Beam - General Method (PDF)
[Section 5.3 of Hughes.]
- Grillage Introduction Degrees of Freedom (PDF)
|
|