SES # | TOPICS | MOTIVATING PROCESSES | INSTRUCTORS | KEY DATES |
---|---|---|---|---|
L1 |
Introduction |
AP |
||
R1 |
Math Review |
WP |
||
I. Solid Heat Treatment |
||||
L2 |
Introduction Energy Conservation and 1-D Conduction |
Various |
AP |
|
L3 |
Sphere Generation Multilayers |
AP |
||
L4 |
Multilayers (cont.) Biot # Finite Differences |
Glass-ceramics |
AP |
|
R2 |
Heat Flow through Multilayer Sheet and Cylinder |
WP |
||
L5 |
Finite Differences (cont.) Radiation |
Polymer Extrusion |
AP |
|
L6 |
Dimensional Analysis |
Furnace Wall |
David Dussault (Guest Lecturer) |
Problem set 1 due |
L7 |
Radiation (cont.) Convective Cooling Curves Dimensionless Graphs |
Thermal Spray |
AP |
|
R3 |
Dimensional Analysis |
Jose Vieyra |
||
L8 |
Convective Cooling Curves (cont.) |
AP |
||
II. Engineering Economics |
||||
L9 |
Introduction |
RK |
||
L10 |
Cost Modeling I: Unit Operations |
Pizza Oven |
RK |
Problem set 2 due |
R4 |
Economic Models in Engineering |
WP |
||
L11 |
Cost Modeling II: Cost Factors and Scale |
RK |
||
III. Liquid-Solid Processing |
||||
L12 |
Moving Bodies |
Vacuum Arc Remelting |
AP |
|
L13 |
Moving Bodies (cont.) Stability |
Casting |
AP |
Problem set 3 due |
R5 |
Casting: Solid-Liquid Process |
WP |
||
L14 |
Stability in Alloy Solidification |
Injection Molding |
AP |
|
IV. Fluid Behavior |
||||
L15 |
Introduction Newtonian Fluids |
AP |
||
L16 |
Test 1 |
AP |
||
R6 |
Fluid Flow and Drag Force on a Sphere, with Examples |
WP |
||
L17 |
Viscous Shear |
AP |
||
L18 |
Tubes Flow Rate Sphere Flow |
Precipitation, Bubbles |
AP |
|
L19 |
Sphere Drag and Reynolds Number |
AP |
||
L20 |
Engineering and Society Particle Velocity |
Lessons of 9/11 |
AP |
|
L21 |
Friction Factors Boundary Layers |
AP |
||
L22 |
Plate Drag Turbulence |
Fermentation |
AP |
Problem set 4 due |
R7 |
Friction Factors and Drag Forces Turbulence |
WP |
||
L23 |
Turbulence (cont.) |
Fermentation |
AP |
|
L24 |
Batch and Continuous Flow Reactors |
Fermentation |
AP |
Problem set 5 due |
L25 |
Chemical Reactors Porous Media |
AP |
||
R8 |
Batch/Continuous Flow Reactors Flow through Porous Media |
WP |
||
L26 |
Porous Media (cont.) |
AP |
||
V. Deformation Processing |
||||
L27 |
Non-newtonian Flow |
Various |
AP |
Problem set 6 due |
L28 |
Deformation Mechanisms |
Polymers, Metals |
AP |
|
R9 |
Test 2 Review Warm Up Practice Problems |
WP |
||
L29 |
Sintering |
HIP, CM |
AP |
|
L30 |
Test 2 |
AP |
||
L31 |
Consolidation Processes |
HIP, CM |
AP |
|
VI. Vapor-Solid Processes |
||||
L32 |
Evaporation Processes |
Zirconia PVD |
AP |
|
R10 |
Sintering (Stage I and Stage II) Evaporation |
WP |
||
L33 |
Vapor Phase Transport Structure Formation |
Thin Films |
AP |
Problem set 7 due |
L34 |
Patterning Polymer Deposition |
Polymer Sputter |
AP |
|
L35 |
Coherent/Expitaxial Films Nanostructure Formation |
VLS |
AP |
|
R11 |
Mean Free Path Structure Zone Model Fabrication Processes |
WP |
||
VII. Special Topics |
||||
L36 |
Process Selection |
AP |
Problem set 8 due |
|
L37 |
Costs of Materials Usage |
RK |
||
L38 |
Wrap Up |
AP |