Electrically Powered High-Salinity Brine Separation Using Dimethyl Ether
Name
Deshmukh2024_IECR_Preprint.pdf
Size
15.7 MB
Format
Adobe PDF
Checksum (MD5)
c19c2cca1f13c8781e21cfe6bf13ab8a
Author(s) • •
Deshmukh, Akshay
Wilson, Aaron D.
Lienhard, John H.
Date Issued
April 23, 2024
Journal
Industrial and Engineering Chemistry Research
Publisher
American Chemical Society
Citation
Akshay Deshmukh, Aaron D. Wilson, John H. Lienhard; Electrically Powered High-Salinity Brine Separation Using Dimethyl Ether. Ind. Eng. Chem. Res. 8 May 2024; 63 (18): 8341–8356.
Version
Author's final manuscript
Abstract
Dewatering highly saline aqueous streams, from mining and geothermal leachates to industrial wastewater, is essential for effective resource recovery and safe disposal. Membraneless water extraction (MWE) uses a low-polarity solvent to separate water from concentrated aqueous solutions. In this study, we design a new MWE that uses dimethyl ether (DME) to selectively extract water from high-salinity brines, leveraging the volatility of DME to achieve rapid solvent recovery. By separating water and dissolved salts at a liquid–liquid interface, MWE minimizes the deleterious effects of scaling on vulnerable membrane and heat exchanger surfaces, reducing the need for extensive pretreatment and expensive materials. We begin by developing a computational framework for a multistage counterflow liquid–liquid contactor, which extracts water into DME, coupled with a multistage solvent regenerator that uses vapor compression to efficiently separate the desalinated water from the DME extractant. Excess Gibbs free energy and equation of state frameworks are used to model fluid phase equilibria in water–DME–sodium chloride (NaCl) mixtures, with interaction parameters estimated from experimental data. Incorporating equilibrium calculations into a system-scale computational model, we examine the performance of MWE using DME for the first time. Our analysis demonstrates that MWE can concentrate seawater desalination brine (>1.0 molNaCl kg–1) to zero-liquid discharge salinities, with an energy consumption of under 50 kW h per m3 of water extracted with a solvent recovery ratio greater than 99.9%. We highlight the importance of staging the vapor compression process to simultaneously minimize energy consumption while enabling brine concentration and product water solvent contamination. The thermodynamic framework developed here allows for the robust evaluation of new MWE solvents and systems for critical brine concentration and fractional precipitation applications.
Subjects
liquid-liquid equilibrium
dimethyl ether
high salinity brine
solvent exaction
vapor compression
MIT Department
Massachusetts Institute of Technology. Department of Mechanical Engineering
Terms of Use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Persistent DSpace Link
DOI of Published Version
https://doi.org/10.1021/acs.iecr.4c00517