Design and Projected Performance of a Flapping Foil AUV
Author(s)Licht, Stephen; Polidoro, Victor; Flores, Melissa; Hover, Franz S.; Triantafyllou, Michael S.
MetadataShow full item record
The design and construction of a biomimetic flapping foil autonomous underwater vehicle is detailed. The vehicle was designed as a proof of concept for the use of oscillating foils as the sole source of motive power for a cruising and hovering underwater vehicle. Primary vehicle design requirements included scalability and flexibility in terms of the number and placement of foils, so as to maximize experimental functionality. This goal was met by designing an independent self-contained module to house each foil, requiring only direct current power and a connection to the vehicle’s Ethernet local area network for operation. The results of tests on the foil modules in the Massachusetts Institute of Technology (MIT) Marine Hydrodynamics Water Tunnel and the MIT Ship Model Testing Tank are both used to demonstrate fundamental properties of flapping foils and to predict the performance of the specific vehicle design based on the limits of the actuators. The maximum speed of the vehicle is estimated based on the limitations of the specific actuator and is shown to be a strong function of the vehicle drag coefficient. When using four foils, the maximum speed increases from 1 m/s with a vehicle Cd of 1.4 to 2 m/s when Cd = 0.1, where Cd is based on vehicle frontal area. Finally, issues of vehicle control are considered, including the decoupling of speed and pitch control using pitch-biased maneuvering and the tradeoff between actuator bandwidth and authority during both the cruising and hovering operation.
Institute of Electrical and Electronic Engineers
IEEE Journal of Oceanic Engineering, 29 (3), p.786-794 (2004)
Biomimetic propulsion, flapping foils, underwater propulsion