Show simple item record

dc.contributor.advisorL. Mahadevan.en_US
dc.contributor.authorTeichman, Jeremy Alan, 1975-en_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Mechanical Engineering.en_US
dc.date.accessioned2005-10-14T19:29:19Z
dc.date.available2005-10-14T19:29:19Z
dc.date.copyright2002en_US
dc.date.issued2002en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/29257
dc.descriptionThesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2002.en_US
dc.descriptionVita.en_US
dc.descriptionIncludes bibliographical references (p. 131-133).en_US
dc.description.abstractThis thesis explores the wrinkling and sagging behavior of thin viscous Newtonian sheets and filaments motivated by analogous scenarios in elasticity. These problems involve dynamic free boundaries and geometric nonlinearities but use simple physics. The first problem examined concerns an annular viscous sheet subjected to torsional shearing which consequently develops spiral wrinkles. Examination of the behavior of this system leads to a scaling of the Stokes equations for zero Reynolds number flow resulting in a reduced order mathematical model for the evolution of the sheet that includes the effects of gravity and surface tension. Linear stability analysis yields the most unstable modes for wrinkling of the sheet and their associated growth rates at onset which agree with experimental observations. In the limit of a narrow annular gap, the problem reduces to that of a sheared rectilinear sheet. Interestingly, this Couette problem shows instabilities even in the zero Reynolds number limit. The second problem examined concerns the sagging of a horizontal viscida (fluid filament) under the influence of gravity. Resistance of the viscida to bending controls the initial phase of deformation, while resistance to stretching begins to play a principal role in later stages. At very late times the process resembles droplet break-off from two thin filaments.en_US
dc.description.statementofresponsibilityby Jeremy Alan Teichman.en_US
dc.format.extent134 p.en_US
dc.format.extent4662413 bytes
dc.format.extent4662221 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypeapplication/pdf
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectMechanical Engineering.en_US
dc.titleWrinkling and sagging of viscous sheetsen_US
dc.typeThesisen_US
dc.description.degreePh.D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.identifier.oclc51849742en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record