Show simple item record

dc.contributor.advisorMary Boyce.en_US
dc.contributor.authorEbeling, Geoffrey F. (Geoffrey Foster), 1981-en_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Mechanical Engineering.en_US
dc.date.accessioned2006-05-15T20:32:29Z
dc.date.available2006-05-15T20:32:29Z
dc.date.copyright2004en_US
dc.date.issued2004en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/32820
dc.descriptionThesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2004.en_US
dc.descriptionIncludes bibliographical references (p. 55-56).en_US
dc.description.abstractCurrently the process of nanoindentation is being explored as a reliable means of determining the mechanical properties of carbon nanotubes (CNTs) and the constituent tubes of vertically aligned carbon nanotube (VACNT) forests. Under indentation, each CNT can be modeled as a cantilevered beam subjected to deflection from the penetration of the indenter. The resistance to indentation is the result of the cumulative bending of the VACNTs. Using beam theory, the effective bending stiffness is determined by fitting the mechanical model to the indentation force-penetration curves. In order to validate the process of nanoindentation as a means of determining the elastic modulus of CNTs, a macro scale physical model was built using cylindrical rods of a known material and used to help explain some of the interactions of the tubes and indenter. Two models and two indenters were built to explore these effects and how they changed between models and indenters. The models demonstrated that for the indenter with a low face angle, the process was rather accurate with corresponding errors of 7% and 15%. When using a flatter indenter on both models, particularly the model with the higher areal density of tubes, demonstrated the inaccuracy of the process as a means for determining the elastic modulus of the material. Such a result was due to abnormal spikes in the data that were observable and attributed to tube interaction with the edge of the indenter. The process of indentation is reliable when the aberrations are minimal or are identifiable in the indentation force versus indentation depth curves and thus can be easily discounted. The process of scratching was also explored. For scratching the indenter is fixed at a certain indentation height and the tube foresten_US
dc.description.abstract(cont.) is then horizontally displaced and thus further deflects the tubes. The tubes enter three phases of contact, which subsequently affect the behavior of the scratching force versus distance curves. The macro scale model was used to validate the predicted behavior of CNTs. In general the scratching data supported the behavior of a three phase interaction between the tubes and indenter and the subsequent curves. For more accurate results and numerical comparisons, the forests need to be displaced using a constant speed linear stage and measured against distance.en_US
dc.description.statementofresponsibilityby Geoffrey F. Ebeling.en_US
dc.format.extent56 p.en_US
dc.format.extent3303590 bytes
dc.format.extent3304646 bytes
dc.format.mimetypeapplication/pdf
dc.format.mimetypeapplication/pdf
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582
dc.subjectMechanical Engineering.en_US
dc.titleMacro scale physical model of nanoindentation on vertically aligned carbon nanotube forestsen_US
dc.typeThesisen_US
dc.description.degreeS.B.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.identifier.oclc57615113en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record