Show simple item record

dc.contributor.advisorPavel Hejzlar and Mujid S. Kazimi.en_US
dc.contributor.authorConboy, Thomas Men_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Nuclear Science and Engineering.en_US
dc.date.accessioned2008-04-23T14:44:11Z
dc.date.available2008-04-23T14:44:11Z
dc.date.copyright2007en_US
dc.date.issued2007en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/41309
dc.descriptionThesis (S.M.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2007.en_US
dc.descriptionIncludes bibliographical references (p. 199-201).en_US
dc.description.abstractPreliminary analysis of the cross-shaped spiral (CSS) fuel assembly suggests great thermal-hydraulic upside. According to computational models, the increase in rod surface area, combined with an increase in coolant turbulence and inter-channel mixing will allow for a greater than 25% uprate in total core power, without loss of safety margin. Proper design of the rod dimensions can limit circumferential heat-flux to a peak-to-average ratio of 1.88. Non-uniformities in heat flux due to its unusual geometry seem to particularly ally CSS fuel to the BWR core, where limiting conditions are less likely to be locally influenced. Furthermore, the increase in cooling surface and reduction in central pin thickness is expected to drop fuel centerline temperature an estimated 2000C under nominal operating conditions, a reduction which rises to 3000C at 125% of nominal power conditions. In addition to these advantages, the absence of grid spacers within the CSS fuel assembly is expected to lower pressure losses, aiding natural convection and core stability. Spacers typically account for 25-30% of the total core pressure drop. Experimental measurements of hydraulic: losses for 1.5-meter-long model CSS rods in 4x4 arrays show a larger pressure drop at the same flow velocity than for bare cylindrical rods. However, this results in a CSS-bundle turbulent friction factor which is only 90% of the expected value given its hydraulic diameter. The effect of twist pitch on this pressure drop and friction factor is negligible in the range of twists examined.en_US
dc.description.abstract(cont.) Combined with the elimination of grid spacers, this results in a 40% reduction in core hydraulic loss from the reference case (neglecting entrance and exit plates). All told, the use of CSS rods should reduce total core pressure drop at nominal power by 9%, in spite of a reduction in core flow area. At 125% of nominal power, this becomes a 16% increase in pressure drop in comparison to the reference core at nominal power.en_US
dc.description.statementofresponsibilityby Thomas M. Conboy.en_US
dc.format.extent201 p.en_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectNuclear Science and Engineering.en_US
dc.titleThermal-hydraulic analysis of cross-shaped spiral fuel in high power density BWRsen_US
dc.title.alternativeThermal-hydraulic analysis of CSS fuel in high power density BWRsen_US
dc.typeThesisen_US
dc.description.degreeS.M.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Nuclear Science and Engineering
dc.identifier.oclc214327770en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record