Show simple item record

dc.contributor.advisorDaniela Rus.en_US
dc.contributor.authorSchwager, Macen_US
dc.contributor.otherMassachusetts Institute of Technology. Dept. of Mechanical Engineering.en_US
dc.date.accessioned2010-05-25T21:10:57Z
dc.date.available2010-05-25T21:10:57Z
dc.date.copyright2009en_US
dc.date.issued2009en_US
dc.identifier.urihttp://hdl.handle.net/1721.1/55256
dc.descriptionThesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2009.en_US
dc.descriptionCataloged from PDF version of thesis.en_US
dc.descriptionIncludes bibliographical references (p. 181-190).en_US
dc.description.abstractThis thesis proposes a unified approach for controlling a group of robots to reach a goal configuration in a decentralized fashion. As a motivating example, robots are controlled to spread out over an environment to provide sensor coverage. This example gives rise to a cost function that is shown to be of a surprisingly general nature. By changing a single free parameter, the cost function captures a variety of different multi-robot objectives which were previously seen as unrelated. Stable, distributed controllers are generated by taking the gradient of this cost function. Two fundamental classes of multi-robot behaviors are delineated based on the convexity of the underlying cost function. Convex cost functions lead to consensus (all robots move to the same position), while any other behavior requires a nonconvex cost function. The multi-robot controllers are then augmented with a stable on-line learning mechanism to adapt to unknown features in the environment. In a sensor coverage application, this allows robots to learn where in the environment they are most needed, and to aggregate in those areas. The learning mechanism uses communication between neighboring robots to enable distributed learning over the multi-robot system in a provably convergent way. Three multi-robot controllers are then implemented on three different robot platforms. Firstly, a controller for deploying robots in an environment to provide sensor coverage is implemented on a group of 16 mobile robots.en_US
dc.description.abstract(cont.) They learn to aggregate around a light source while covering the environment. Secondly, a controller is implemented for deploying a group of three flying robots with downward facing cameras to monitor an environment on the ground. Thirdly, the multi-robot model is used as a basis for modeling the behavior of a herd of cows using a system identification approach. The controllers in this thesis are distributed, theoretically proven, and implemented on multi-robot platforms.en_US
dc.description.statementofresponsibilityby Mac Schwager.en_US
dc.format.extent190 p.en_US
dc.language.isoengen_US
dc.publisherMassachusetts Institute of Technologyen_US
dc.rightsM.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.en_US
dc.rights.urihttp://dspace.mit.edu/handle/1721.1/7582en_US
dc.subjectMechanical Engineering.en_US
dc.titleA gradient optimization approach to adaptive multi-robot controlen_US
dc.typeThesisen_US
dc.description.degreePh.D.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineering
dc.identifier.oclc612385503en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record