Search
Now showing items 1-10 of 10
Model of critical heat flux in subcooled flow boiling
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1968], 1968)
The physical phenomenon occurring before and at the critical heat flux (CHF) for subcooled flow boiling has been investigated. The first phase of this study established the basic nature of the flow structure at CHF. A ...
Forced-convection, dispersed-flow film boiling
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1969], 1969)
This report presents the latest results of an investigation of the characteristics of dispersed flow film boiling. Heat transfer data are presented for vertical upflow of nitrogen in an electrically heated tube, 0.4 in. ...
A study of boiling water flow regimes at low pressures
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1966], 1966)
"A comprehensive experimental program to examine flow regimes at pressures below 100 psia for boiling of water in tubes was carried out. An electrical probe, which measures the resistance of the fluid between the centerline ...
Forced-convection surface-boiling heat transfer and burnout in tubes of small diameters
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1962], 1962)
A basic heat-transfer apparatus was designed and constructed for the study of forced-convection boiling in small channels. The various regions of forced-convection surface boiling were studied experimentally and analytically. ...
Tables for solution of the heat-conduction equation with a time-dependent heating rate
(Cambridge, Mass. : M.I.T. Heat Transfer Laboratory, [1962], 1962)
Tables are presented for the solution of the transient onedimensional heat flow in a solid body of constant material properties with the heating rate at one boundary dependent on time. These tables allow convenient and ...
Heat transfer and pressure drop in tape generated swirl flow
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1967], 1967)
The heat transfer and pressure drop characteristics of water in tape generated swirl flow were investigated. The test sections were electrically heated small diameter nickel tubes with tight fitting full length Inconel ...
Cooling of high-power-density computer components
(Cambridge, Mass. : M.I.T. Heat Transfer Laboratory, [1968], 1968)
This report summarizes work carried out during the first two years of a research program sponsored by IBM Corporation. This study has elucidated a number of the heat-transfer characteristics of several fluorochemicals which ...
Survey and evaluation of techniques to augment convective heat transfer
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1965], 1965)
This report presents a survey and evaluation of the numerous techniques which have been shown to augment convective heat transfer. These techniques are: surface promoters, including roughness and treatment; displaced ...
An experimental and theoretical study of density wave oscillations in two-phase flow
(Cambridge, M.I.T. Engineering Projects Laboratory [1969], 1969)
Pressure drop with surface boiling in small-diameter tubes
(Cambridge, Mass. : M.I.T. Dept. of Mechanical Engineering, [1964, 1964)
Pressure drop for water flowing in small-diameter tubes under isothermal, nonboiling, and surface-boiling conditions was investigated. Experimental results for local pressure gradient and heattransfer coefficients are ...