0 |
Introduction - purpose of subject |
|
|
No Recitation: No Lab |
|
1 |
Basic concepts in electricity: No Lab Ch. 1 |
|
|
Recitation: Practical applications, safety Ch. 1
Lab 1: Lab Equipment and Resistor Networks |
|
2 |
DC circuits I: KCL, KVL: 2.1-2.4 |
|
|
Recitation: Examples using standard analysis: Lab #1: 2.1-2.4 |
|
3 |
Lecture #3: DC circuits II: nodal analysis: Lab #1: 2.5-2.8, 3.1 |
|
|
Recitation: Loop analysis, maximum power: 3.2, 4.4 |
|
4 |
Lecture #4: DC circuits III: Thevenin circuit: No Lab: 4.1-4.3 |
|
|
Recitation: Norton Circuit, examples: 4.3, 4.5 |
|
5 |
Lecture #5: Circuits with capacitors: 5.1, 6.2 |
|
|
Recitation: The: function, examples: Lab #1 |
|
6 |
Lecture #6: Circuits with inductors: Lab #1 |
|
|
Recitation: Lab 2: Lab Equipment and Resistor Networks |
Quiz #1 |
7 |
RLC circuits: 6.3 |
|
|
Recitation: function response, examples: Lab #2: 6.4 |
|
8 |
AC sinusoidal steady state: Lab #2: 7.1-7.8 |
|
|
Recitation: Review SSS, examples: 7.9 |
|
9 |
Time vs. frequency domain: 9.1-9.6 |
|
|
Recitation: Filters: Lab #2: 11.1, 11.5 |
|
10 |
Resonance: Lab #2: 11.3 |
|
|
Bode diagram, quality factor Q: 11.1, 11.2 |
|
11 |
Fourier series: 14.1 |
|
|
Fourier transforms: Lab #2: 14.2 |
|
12 |
Basic concepts in information: Lab #2 |
|
|
Recitation |
Quiz #2 |
13 |
Diodes: 16.1, 16.2 |
|
|
Recitation: Diode applications: No Lab: 16.2 |
|
14 |
Bipolar transistors: No Lab |
|
|
Recitation |
|
15 |
Semiconductors |
|
|
Recitation: Lab #3 |
|
16 |
Transistors, Load Lines: Lab #3 |
|
|
Recitation |
|
17 |
FETs: Lab #3 |
|
|
Recitation |
|
18 |
Intro to Op Amps |
|
|
Recitation |
Quiz #3 |
19 |
Applications of Op Amps |
|
|
Recitation |
|
20 |
A/D & Oscillators |
|
|
Recitation: Lab #4 Operational Amplifiers and ICs |
|
21 |
Intro Digital devices: Lab #4 |
|
|
Recitation |
|
22 |
Digital Logic |
|
|
Recitation: Lab #4 |
|
23 |
Digital Logic (Continued): Lab #4 |
|
|
Recitation |
Quiz #4 |
24 |
Opto Electronics |
|
|
Recitation: No Lab |
|
25/26 |
Voltage Regulators/Electronic Sensors: No Lab |
|