Show simple item record

dc.contributor.authorKashif, Faisal Mahmood
dc.contributor.authorVerghese, George C.
dc.contributor.authorHeldt, Thomas
dc.contributor.authorNovak, Vera
dc.contributor.authorCzosnyka, Marek
dc.date.accessioned2014-10-20T17:14:51Z
dc.date.available2014-10-20T17:14:51Z
dc.date.issued2012-04
dc.date.submitted2011-09
dc.identifier.issn1946-6234
dc.identifier.issn1946-6242
dc.identifier.urihttp://hdl.handle.net/1721.1/90993
dc.description.abstractIntracranial pressure (ICP) is affected in many neurological conditions. Clinical measurement of pressure on the brain currently requires placing a probe in the cerebrospinal fluid compartment, the brain tissue, or other intracranial space. This invasiveness limits the measurement to critically ill patients. Because ICP is also clinically important in conditions ranging from brain tumors and hydrocephalus to concussions, noninvasive determination of ICP would be desirable. Our model-based approach to continuous estimation and tracking of ICP uses routinely obtainable time-synchronized, noninvasive (or minimally invasive) measurements of peripheral arterial blood pressure and blood flow velocity in the middle cerebral artery (MCA), both at intra-heartbeat resolution. A physiological model of cerebrovascular dynamics provides mathematical constraints that relate the measured waveforms to ICP. Our algorithm produces patient-specific ICP estimates with no calibration or training. Using 35 hours of data from 37 patients with traumatic brain injury, we generated ICP estimates on 2665 nonoverlapping 60-beat data windows. Referenced against concurrently recorded invasive parenchymal ICP that varied over 100 millimeters of mercury (mmHg) across all records, our estimates achieved a mean error (bias) of 1.6 mmHg and SD of error (SDE) of 7.6 mmHg. For the 1673 data windows over 22 hours in which blood flow velocity recordings were available from both the left and the right MCA, averaging the resulting bilateral ICP estimates reduced the bias to 1.5 mmHg and SDE to 5.9 mmHg. This accuracy is already comparable to that of some invasive ICP measurement methods in current clinical use.en_US
dc.description.sponsorshipNational Institutes of Health (U.S.) (R01 EB001659)en_US
dc.description.sponsorshipCIMIT: Center for Integration of Medicine and Innovative Technologyen_US
dc.language.isoen_US
dc.publisherAmerican Association for the Advancement of Science (AAAS)en_US
dc.relation.isversionofhttp://dx.doi.org/10.1126/scitranslmed.3003249en_US
dc.rightsCreative Commons Attribution-Noncommercial-Share Alikeen_US
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/en_US
dc.sourcePMCen_US
dc.titleModel-Based Noninvasive Estimation of Intracranial Pressure from Cerebral Blood Flow Velocity and Arterial Pressureen_US
dc.typeArticleen_US
dc.identifier.citationKashif, F. M., G. C. Verghese, V. Novak, M. Czosnyka, and T. Heldt. “Model-Based Noninvasive Estimation of Intracranial Pressure from Cerebral Blood Flow Velocity and Arterial Pressure.” Science Translational Medicine 4, no. 129 (April 11, 2012): 129ra44–129ra44.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Electrical Engineering and Computer Scienceen_US
dc.contributor.departmentMassachusetts Institute of Technology. Research Laboratory of Electronicsen_US
dc.contributor.mitauthorKashif, Faisal Mahmooden_US
dc.contributor.mitauthorVerghese, George C.en_US
dc.contributor.mitauthorHeldt, Thomasen_US
dc.relation.journalScience Translational Medicineen_US
dc.eprint.versionAuthor's final manuscripten_US
dc.type.urihttp://purl.org/eprint/type/JournalArticleen_US
eprint.statushttp://purl.org/eprint/status/PeerRevieweden_US
dspace.orderedauthorsKashif, F. M.; Verghese, G. C.; Novak, V.; Czosnyka, M.; Heldt, T.en_US
dc.identifier.orcidhttps://orcid.org/0000-0002-5930-7694
dc.identifier.orcidhttps://orcid.org/0000-0002-2446-1499
dspace.mitauthor.errortrue
mit.licenseOPEN_ACCESS_POLICYen_US
mit.metadata.statusComplete


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record