Show simple item record

dc.contributor.authorLee, Kwang Hong
dc.contributor.authorBao, Shuyu
dc.contributor.authorChong, Gang Yih
dc.contributor.authorTan, Yew Heng
dc.contributor.authorFitzgerald, Eugene A.
dc.contributor.authorTan, Chuan Seng
dc.date.accessioned2016-05-23T01:29:33Z
dc.date.available2016-05-23T01:29:33Z
dc.date.issued2015-01
dc.date.submitted2014-10
dc.identifier.issn2166-532X
dc.identifier.urihttp://hdl.handle.net/1721.1/102591
dc.description.abstractA method to remove the misfit dislocations and reduce the threading dislocations density (TDD) in the germanium (Ge) epilayer growth on a silicon (Si) substrate is presented. The Ge epitaxial film is grown directly on the Si (001) donor wafer using a “three-step growth” approach in a reduced pressure chemical vapour deposition. The Ge epilayer is then bonded and transferred to another Si (001) handle wafer to form a germanium-on-insulator (GOI) substrate. The misfit dislocations, which are initially hidden along the Ge/Si interface, are now accessible from the top surface. These misfit dislocations are then removed by annealing the GOI substrate. After the annealing, the TDD of the Ge epilayer can be reduced by at least two orders of magnitude to <5 × 10[superscript 6] cm[superscript −2].en_US
dc.description.sponsorshipSingapore. National Research Foundation (Singapore-MIT Alliance for Research and Technology)en_US
dc.language.isoen_US
dc.publisherAmerican Institute of Physics (AIP)en_US
dc.relation.isversionofhttp://dx.doi.org/10.1063/1.4905487en_US
dc.rightsCreative Commons Attributionen_US
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/en_US
dc.sourceFitzgeralden_US
dc.titleDefects reduction of Ge epitaxial film in a germanium-on-insulator wafer by annealing in oxygen ambienten_US
dc.typeArticleen_US
dc.identifier.citationLee, Kwang Hong, Shuyu Bao, Gang Yih Chong, Yew Heng Tan, Eugene A. Fitzgerald, and Chuan Seng Tan. “Defects Reduction of Ge Epitaxial Film in a Germanium-on-Insulator Wafer by Annealing in Oxygen Ambient.” APL Materials 3, no. 1 (January 1, 2015): 16102.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Materials Science and Engineeringen_US
dc.contributor.approverFitzgerald, Eugene A.en_US
dc.contributor.mitauthorFitzgerald, Eugene A.en_US
dc.relation.journalAPL Materialsen_US
dc.eprint.versionFinal published versionen_US
dc.type.urihttp://purl.org/eprint/type/JournalArticleen_US
eprint.statushttp://purl.org/eprint/status/PeerRevieweden_US
dspace.orderedauthorsLee, Kwang Hong; Bao, Shuyu; Chong, Gang Yih; Tan, Yew Heng; Fitzgerald, Eugene A.; Tan, Chuan Sengen_US
dspace.embargo.termsNen_US
dc.identifier.orcidhttps://orcid.org/0000-0002-1891-1959
mit.licensePUBLISHER_CCen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record