Analysis and Control of a Variable-Pitch Quadrotor for Agile Flight
Author(s)
Cutler, Mark Johnson; How, Jonathan P
DownloadHow_Analysis and control.pdf (3.075Mb)
PUBLISHER_POLICY
Publisher Policy
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Terms of use
Metadata
Show full item recordAbstract
Fixed-pitch quadrotors are popular research and hobby platforms largely due to their mechanical simplicity relative to other hovering aircraft. This simplicity, however, places fundamental limits on the achievable actuator bandwidth and the possible flight maneuvers. This paper shows that many of these limitations can be overcome by utilizing variable-pitch propellers on a quadrotor. A detailed analysis of the potential benefits of variable-pitch propellers over fixed-pitch propellers for a quadrotor is presented. This analysis is supported with experimental testing to show that variable-pitch propellers, in addition to allowing for generation of reverse thrust, substantially increase the maximum rate of thrust change. A nonlinear, quaternion-based control algorithm for controlling the quadrotor is also presented with an accompanying trajectory generation method that finds polynomial minimum-time paths based on actuator saturation levels. The control law and trajectory generation algorithms are implemented on a custom variable-pitch quadrotor. Several flight tests are shown, which highlight the benefits of a variable-pitch quadrotor over a standard fixed-pitch quadrotor for performing aggressive and aerobatic maneuvers.
Date issued
2015-07Department
Massachusetts Institute of Technology. Department of Aeronautics and AstronauticsJournal
Journal of Dynamic Systems, Measurement, and Control
Publisher
American Society of Mechanical Engineers
Citation
Cutler, Mark and How, Jonathan P. “Analysis and Control of a Variable-Pitch Quadrotor for Agile Flight.” Journal of Dynamic Systems, Measurement, and Control 137, no. 10 (July 2015): 101002. © 2015 American Society of Mechanical Engineers
Version: Final published version
ISSN
0022-0434
1528-9028