Design of the deformable mirror demonstration CubeSat (DeMi)
Author(s)Merck, John; Skouloudis, Nikolaos; Douglas, Ewan S.; Cahoy, Kerri; Allan, Gregory W.; Barnes, Derek C.; Figura, Joseph S.; Haughwout, Christian Alexander; Gubner, Jennifer N.; Knoedler, Alexander A.; LeClair, Sarah; Murphy, Thomas J.; Opperman, Roedolph A; ... Show more Show less
MetadataShow full item record
The Deformable Mirror Demonstration Mission (DeMi) was recently selected by DARPA to demonstrate in-space operation of a wavefront sensor and Microelectromechanical system (MEMS) deformable mirror (DM) payload on a 6U CubeSat. Space telescopes designed to make high-contrast observations using internal coronagraphs for direct characterization of exoplanets require the use of high-actuator density deformable mirrors. These DMs can correct image plane aberrations and speckles caused by imperfections, thermal distortions, and diffraction in the telescope and optics that would otherwise corrupt the wavefront and allow leaking starlight to contaminate coronagraphic images. DeMi is provide on-orbit demonstration and performance characterization of a MEMS deformable mirror and closed loop wavefront sensing. The DeMi payload has two operational modes, one mode that images an internal light source and another mode which uses an external aperture to images stars. Both the internal and external modes include image plane and pupil plane wavefront sensing. The objectives of the internal measurement of the 140-actuator MEMS DM actuator displacement are characterization of the mirror performance and demonstration of closed-loop correction of aberrations in the optical path. Using the external aperture to observe stars of magnitude 2 or brighter, assuming 3-axis stability with less than 0.1 degree of attitude knowledge and jitter below 10 arcsec RMSE, per observation, DeMi will also demonstrate closed loop wavefront control on an astrophysical target. We present an updated payload design, results from simulations and laboratory optical prototyping, as well as present our design for accommodating high-voltage multichannel drive electronics for the DM on a CubeSat.
DepartmentMassachusetts Institute of Technology. Department of Aeronautics and Astronautics
Proceedings Volume 10400, Techniques and Instrumentation for Detection of Exoplanets VIII
Douglas, Ewan S., et al. "Design of the Deformable Mirror Demonstration CubeSat (DeMi)." Proceedings Volume 10400, Techniques and Instrumentation for Detection of Exoplanets VIII, 6-10 August, 2017, San Diego, California, edited by Stuart Shaklan, SPIE, 2017, p. 37. © 2017 SPIE.
Final published version
United States. Defense Advanced Research Projects Agency (Aurora Flight Sciences)