Show simple item record

dc.contributor.authorAlsing, P. M.
dc.contributor.authorMogent, N. A.
dc.contributor.authorThomas, P. M.
dc.contributor.authorFanto, M. L.
dc.contributor.authorTison, C. C.
dc.contributor.authorSteidle, J. A.
dc.contributor.authorPreble, S. F.
dc.contributor.authorRizzo, A.
dc.contributor.authorLu, Timothy K
dc.contributor.authorWang, Zihao
dc.contributor.authorEnglund, Dirk R.
dc.date.accessioned2018-06-19T14:31:07Z
dc.date.available2018-06-19T14:31:07Z
dc.date.issued2017-10
dc.identifier.isbn9781510613485
dc.identifier.isbn9781510613492
dc.identifier.urihttp://hdl.handle.net/1721.1/116405
dc.description.abstractRing resonators are used as photon pair sources by taking advantage of the materials second or third order non-linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ∼10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ∼ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.en_US
dc.description.sponsorshipNational Science Foundation (U.S.) (Grant ECCS- 1542081)en_US
dc.description.sponsorshipNational Science Foundation (U.S.) (Award No. ECCS14052481)en_US
dc.publisherSPIE-Intl Soc Optical Engen_US
dc.relation.isversionofhttp://dx.doi.org/10.1117/12.2282154en_US
dc.rightsArticle is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.en_US
dc.sourceSPIEen_US
dc.subjectIntegrated Photonics, Entangled Photon Sources, Quantumen_US
dc.titleIntegrated photon sources for quantum information science applicationsen_US
dc.typeArticleen_US
dc.identifier.citationFanto, M. L., C. C. Tison, J. A. Steidle, T. Lu, Z. Wang, N. A. Mogent, A. Rizzo, P. M. Thomas, S. F. Preble, P. M. Alsing and D. R. Englund. “Integrated Photon Sources for Quantum Information Science Applications.” Edited by Mark T. Gruneisen, Miloslav Dusek, and John G. Rarity. Quantum Information Science and Technology III (October 5, 2017).en_US
dc.contributor.departmentInstitute for Medical Engineering and Scienceen_US
dc.contributor.departmentHarvard University--MIT Division of Health Sciences and Technologyen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Biological Engineeringen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Electrical Engineering and Computer Scienceen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineeringen_US
dc.contributor.mitauthorLu, Timothy K
dc.contributor.mitauthorWang, Zihao
dc.contributor.mitauthorEnglund, Dirk R.
dc.relation.journalQuantum Information Science and Technology IIIen_US
dc.eprint.versionFinal published versionen_US
dc.type.urihttp://purl.org/eprint/type/ConferencePaperen_US
eprint.statushttp://purl.org/eprint/status/NonPeerRevieweden_US
dc.date.updated2018-04-24T16:19:53Z
dspace.orderedauthorsFanto, M. L.; Tison, C. C.; Steidle, J. A.; Lu, T.; Wang, Z.; Mogent, N. A.; Rizzo, A.; Thomas, P. M.; Preble, S. F.; Alsing, P. M.; Englund, D. R.en_US
dspace.embargo.termsNen_US
dc.identifier.orcidhttps://orcid.org/0000-0002-9999-6690
mit.licensePUBLISHER_POLICYen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record