Optimal Control of a Magnetically Suspended Under Actuated Robot for Swing-Up Motion
Author(s)
Mazumdar, Anirban; Asada, Haruhiko
Download755_1.pdf (693.6Kb)
PUBLISHER_POLICY
Publisher Policy
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Terms of use
Metadata
Show full item recordAbstract
This paper describes the analysis, design, and implementation of an under-actuated robot control system for swing up motion. The robot, called the “Mag-Foot” robot, uses permanent magnets to adhere to steel surfaces. This robot uses a novel tilting foot design for locomotion and can swing over small obstacles using an underactuated swinging motion. Since the robot can only adhere to the surface using limited (and relatively small) magnetic forces, it may fall down due to the reaction forces caused by the swing- up motion. To prevent failure, an optimal swing up trajectory is designed so that the maximum reaction force during the trajectory is minimized. The trajectories are parameterized using sigmoids and are determined by solving the dynamic equations as a 2 point boundary value problem. Finally, experiments are performed to evaluate the validity of this approach. The results of these experiments are promising and illustrate the validity of our approach. Topics: Motion, Robots, Optimal control
Date issued
2009-10Department
Massachusetts Institute of Technology. Department of Mechanical EngineeringJournal
ASME 2009 Dynamic Systems and Control Conference, Volume 2
Publisher
American Society of Mechanical Engineers
Citation
Mazumdar, Anirban, and H. Harry Asada. “Optimal Control of a Magnetically Suspended Under Actuated Robot for Swing-Up Motion.” ASME 2009 Dynamic Systems and Control Conference, Volume 2, 12-14 October, 2009, Hollywood, California, ASME, 2009, pp. 755–62. © 2009 by ASME
Version: Final published version
ISBN
978-0-7918-4893-7
978-0-7918-3860-0