MIT Libraries logoDSpace@MIT

MIT
View Item 
  • DSpace@MIT Home
  • MIT Open Access Articles
  • MIT Open Access Articles
  • View Item
  • DSpace@MIT Home
  • MIT Open Access Articles
  • MIT Open Access Articles
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

A Hybrid Computational and Analytical Model of Inline Drip Emitters

Author(s)
Narain, Jaya; Winter, Amos G.
Thumbnail
Downloadv02bt03a018-detc2018-85871.pdf (6.515Mb)
PUBLISHER_POLICY

Publisher Policy

Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.

Terms of use
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use.
Metadata
Show full item record
Abstract
This paper details a hybrid computational and analytical model to predict the performance of inline pressure-compensating (PC) drip irrigation emitters. The term inline refers to flow control devices mounted within the irrigation tubing. Pressure-compensating emitters deliver a relatively constant flow rate over a range applied pressure to accurately meter water to crops. Flow rate is controlled within the emitter by directing the water through a tortuous path (which imposes a fixed resistance), and then through a variable resistor composed of a flexible membrane that deflects under changes in pressure, restricting the flow path. An experimentally validated computational fluid dynamics (CFD) model was used to predict flow behavior through tortuous paths, and a pressure resistance parameter was derived to represent the pressure drop with a single variable. The bending and shearing mechanics of the membrane were modeled analytically and refined for accuracy by deriving a correction factor using finite element analysis. A least-squares matrix formulation that calculates the force applied by a line load of any shape, along which there is a prescribed deflection applied on a rectangular membrane, was derived and was found to be accurate to within one percent. The applicability of the assumption of locally fully developed flow through the pressure compensating chamber in a drip emitter was analyzed. The combined hybrid computational-analytical model reduces the computational time of modeling drip emitter performance from days to less than 30 minutes, dramatically lowering the time required to iterate and select optimal designs. The model was validated using three commercially available drip emitters, rated at 1.1, 2, and 3.8 L/hr. For each, the model predicted the flow rate with an error of twenty percent or less, as compared to the emitter performance published by the manufacturer.
Date issued
2018-08
URI
http://hdl.handle.net/1721.1/120854
Department
MIT-SUTD Collaboration; Massachusetts Institute of Technology. Department of Biological Engineering; Massachusetts Institute of Technology. Department of Mechanical Engineering
Journal
Volume 2B: 44th Design Automation Conference
Publisher
American Society of Mechanical Engineers
Citation
Narain, Jaya, and Amos G. Winter. “A Hybrid Computational and Analytical Model of Inline Drip Emitters.” Volume 2B: 44th Design Automation Conference (August 26, 2018).
Version: Final published version
ISBN
978-0-7918-5176-0

Collections
  • MIT Open Access Articles

Browse

All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

My Account

Login

Statistics

OA StatisticsStatistics by CountryStatistics by Department
MIT Libraries
PrivacyPermissionsAccessibilityContact us
MIT
Content created by the MIT Libraries, CC BY-NC unless otherwise noted. Notify us about copyright concerns.