| dc.contributor.author | Lienhard, John H | |
| dc.date.accessioned | 2019-08-19T16:57:45Z | |
| dc.date.available | 2019-08-19T16:57:45Z | |
| dc.date.issued | 2019-05 | |
| dc.date.submitted | 2019-04 | |
| dc.identifier.issn | 0022-1481 | |
| dc.identifier.uri | https://hdl.handle.net/1721.1/122001 | |
| dc.description.abstract | © 2019 by ASME. Desalination systems can be conceptualized as power cycles in which the useful work output is the work of separation of fresh water from saline water. In this framing, thermodynamic analysis provides powerful tools for raising energy efficiency. This paper discusses the use of entropy generation minimization for a spectrum of desalination technologies, including those based on reverse osmosis (RO), humidification-dehumidification (HDH), membrane distillation (MD), electrodialysis (ED), and forward osmosis (FO). Heat and mass transfer are the primary causes of entropy production in these systems. The energy efficiency of desalination is shown to be maximized when entropy generation is minimized. Equipartitioning of entropy generation is considered and applied. The mechanisms of entropy generation are characterized, including the identification of major causes of irreversibility. Methods to limit discarded exergy are also identified. Prospects and technology development needs for further improvement are mentioned briefly. | en_US |
| dc.language.iso | en | |
| dc.publisher | ASME International | en_US |
| dc.relation.isversionof | http://dx.doi.org/10.1115/1.4043571 | en_US |
| dc.rights | Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use. | en_US |
| dc.source | Prof. Lienhard | en_US |
| dc.title | Energy Savings in Desalination Technologies: Reducing Entropy Generation by Transport Processes | en_US |
| dc.type | Article | en_US |
| dc.identifier.citation | Lienhard, John H., V. "Energy Savings in Desalination Technologies: Reducing Entropy Generation by Transport Processes." Journal of Heat Transfer 141, 7 (May 2019): 072001 © 2019 ASME | en_US |
| dc.contributor.department | Massachusetts Institute of Technology. Department of Mechanical Engineering | en_US |
| dc.contributor.department | Rohsenow Kendall Heat Transfer Laboratory (Massachusetts Institute of Technology) | en_US |
| dc.relation.journal | Journal of Heat Transfer | en_US |
| dc.eprint.version | Final published version | en_US |
| dc.type.uri | http://purl.org/eprint/type/JournalArticle | en_US |
| eprint.status | http://purl.org/eprint/status/PeerReviewed | en_US |
| dc.date.updated | 2019-08-19T13:10:42Z | |
| dspace.date.submission | 2019-08-19T13:10:43Z | |
| mit.journal.volume | 141 | en_US |
| mit.journal.issue | 7 | en_US |