Show simple item record

dc.contributor.authorSofia, Sarah Elizabeth
dc.contributor.authorWang, Hao
dc.contributor.authorBruno, Annalisa
dc.contributor.authorCruz-Campa, Jose Luis
dc.contributor.authorBuonassisi, Anthony
dc.contributor.authorPeters, Ian Marius
dc.date.accessioned2020-02-13T16:14:19Z
dc.date.available2020-02-13T16:14:19Z
dc.date.issued2019-12
dc.date.submitted2019-07
dc.identifier.issn2398-4902
dc.identifier.urihttps://hdl.handle.net/1721.1/123800
dc.description.abstractA techno-economic analysis of perovskite-silicon tandem solar modules is presented, outlining the most viable pathway for designing cost-effective, commercially viable tandems. We explore the cost-performance trade-off for silicon bottom cells in perovskite-silicon tandems, and evaluate the potential of using low-cost, lower-efficiency silicon bottom cells, on the basis of levelized cost of electricity (LCOE), compared to the higher-efficiency, higher-cost bottom cells that have been the primary focus of most perovskite-silicon tandem research efforts. We fabricate a cost-effective four-terminal silicon-perovskite tandem using a low-cost multicrystalline bottom cell and calculate the device LCOE. We then extend this analysis by modeling performance and LCOE of similar tandems instead using high-efficiency silicon bottom cells, enabling direct comparison of a low-cost and a high-efficiency tandem. Lastly parametric analyses are performed to more broadly examine the bottom-cell cost-performance trade-off. We show that low-cost silicon, even at the detriment of efficiency, is the more likely path to make perovskite-silicon tandems commercially viable and enable future reductions in LCOE, given both current and near-future silicon technology. We lay out a clear economic motivation for pursuing low-cost silicon bottom cells in perovskite-silicon tandems, showing that they can achieve a 15–20% relative LCOE reduction compared to the single-junction sub-cells. This is a 2–3 times greater relative LCOE reduction compared with using high-efficiency silicon. Furthermore, we show that the advantage of using low-cost silicon bottom cells is robust to and benefits from expected market trends, such as falling system costs and advanced, low-cost manufacturing. This work provides a clear pathway to cost-effective tandems, outlines the benefits for existing multicrystalline silicon manufacturers to investing in tandem development, and points out a clear mismatch between commercial viability and current research efforts.en_US
dc.publisherRoyal Society of Chemistry (RSC)en_US
dc.relation.isversionofhttp://dx.doi.org/10.1039/c9se00948een_US
dc.rightsCreative Commons Attribution Noncommercial 3.0 unported licenseen_US
dc.rights.urihttps://creativecommons.org/licenses/by-nc/3.0/en_US
dc.sourceRoyal Society of Chemistry (RSC)en_US
dc.titleRoadmap for cost-effective, commercially-viable perovskite silicon tandems for the current and future PV marketen_US
dc.typeArticleen_US
dc.identifier.citationSofia, Sarah E. et al. "Roadmap for cost-effective, commercially-viable perovskite silicon tandems for the current and future PV market." Sustainable Energy & Fuels 4 (February 2020): 852-862 © 2020 Royal Society of Chemistryen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Mechanical Engineeringen_US
dc.contributor.departmentMassachusetts Institute of Technology. Department of Chemical Engineeringen_US
dc.relation.journalSustainable Energy & Fuelsen_US
dc.eprint.versionFinal published versionen_US
dc.type.urihttp://purl.org/eprint/type/JournalArticleen_US
eprint.statushttp://purl.org/eprint/status/PeerRevieweden_US
dspace.date.submission2020-02-11T17:12:44Z
mit.journal.volume4en_US
mit.licensePUBLISHER_CC
mit.metadata.statusComplete


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record