Show simple item record

dc.contributor.authorPeeters, Cédric
dc.contributor.authorLeclère, Quentin
dc.contributor.authorAntoni, Jérôme
dc.contributor.authorLindahl, Peter
dc.contributor.authorDonnal, John
dc.contributor.authorLeeb, Steven B.
dc.contributor.authorHelsen, Jan
dc.date.accessioned2021-04-01T17:39:47Z
dc.date.available2021-04-01T17:39:47Z
dc.date.issued2019-04
dc.date.submitted2019-02
dc.identifier.issn0888-3270
dc.identifier.urihttps://hdl.handle.net/1721.1/130338
dc.description.abstractInstantaneous speed estimation has become a key part of many condition monitoring procedures for rotating machinery. The ability to track the rotational speed of a system is a critical requirement for the majority of vibration-based condition monitoring methods. Information about the speed enables compensating for potential speed variations that would otherwise impair conventional frequency-based methods. The problem of instantaneous speed estimation based on the vibration signals themselves is one that has received a significant amount of attention in recent years. Installing encoders or tachometers has become a lot less attractive due to the potential cost savings that can be obtained by simply utilizing an accelerometer instead. However, trying to find a speed estimation method that fits a certain application “best” is not so straightforward if one inspects the available literature. It turns out that there are many articles that present slight variations or extensions to already existing techniques. This paper targets a general overview of the available knowledge regarding vibration-based speed estimation techniques. It also aims to review some of the most commonly used techniques by means of a performance comparison of seven speed estimation methods on three different experimental data sets. The resulting speed estimation data of all tested methods is made publicly available such that it can help in forming a benchmark for future speed estimation methods.en_US
dc.language.isoen
dc.publisherElsevier BVen_US
dc.relation.isversionofhttp://dx.doi.org/10.1016/j.ymssp.2019.02.031en_US
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivs Licenseen_US
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/en_US
dc.sourceOther repositoryen_US
dc.titleReview and comparison of tacholess instantaneous speed estimation methods on experimental vibration dataen_US
dc.typeArticleen_US
dc.identifier.citationPeeters, Cédric et al. "Review and comparison of tacholess instantaneous speed estimation methods on experimental vibration data." Mechanical Systems and Signal Processing 129 (August 20190: 407-436. © 2019 Elsevier Ltden_US
dc.contributor.departmentMassachusetts Institute of Technology. Research Laboratory of Electronicsen_US
dc.relation.journalMechanical Systems and Signal Processingen_US
dc.eprint.versionAuthor's final manuscripten_US
dc.type.urihttp://purl.org/eprint/type/JournalArticleen_US
eprint.statushttp://purl.org/eprint/status/PeerRevieweden_US
dc.date.updated2021-01-28T18:29:54Z
dspace.orderedauthorsPeeters, C; Leclère, Q; Antoni, J; Lindahl, P; Donnal, J; Leeb, S; Helsen, Jen_US
dspace.date.submission2021-01-28T18:30:20Z
mit.journal.volume129en_US
mit.licensePUBLISHER_CC


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record