Show simple item record

Realization of a large-acceptance Faraday Cup for 3 MeV electrons

dc.contributor.authorJohnston, R
dc.contributor.authorBernauer, J
dc.contributor.authorCooke, CM
dc.contributor.authorCorliss, R
dc.contributor.authorEpstein, CS
dc.contributor.authorFisher, P
dc.contributor.authorFriščić, I
dc.contributor.authorHasell, D
dc.contributor.authorIhloff, E
dc.contributor.authorKelsey, J
dc.contributor.authorLee, S
dc.contributor.authorMilner, RG
dc.contributor.authorMoran, P
dc.contributor.authorSteadman, SG
dc.contributor.authorVidal, C
dc.date.accessioned2021-10-27T20:04:30Z
dc.date.available2021-10-27T20:04:30Z
dc.date.issued2019
dc.identifier.urihttps://hdl.handle.net/1721.1/134340
dc.description.abstract© 2019 Elsevier B.V. The design, construction, installation, and testing of a Faraday Cup intended to measure the current of a 3 MeV, 1 μA electron beam is described. Built as a current monitor for a Møller scattering measurement at the MIT High Voltage Research Laboratory, the device combines a large angular acceptance with the capability to measure a continuous, low energy beam. Bench studies of its performance demonstrate current measurements accurate to the percent level at 1 μA. The Faraday Cup was designed and constructed at MIT and has been in use at the HVRL since 2017, providing a significantly more detailed measurement of beam current than was previously available.
dc.language.isoen
dc.publisherElsevier BV
dc.relation.isversionof10.1016/J.NIMA.2018.12.080
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivs License
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourcearXiv
dc.titleRealization of a large-acceptance Faraday Cup for 3 MeV electrons
dc.typeArticle
dc.contributor.departmentMassachusetts Institute of Technology. Laboratory for Nuclear Science
dc.contributor.departmentMassachusetts Institute of Technology. Research Laboratory of Electronics
dc.relation.journalNuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
dc.eprint.versionOriginal manuscript
dc.type.urihttp://purl.org/eprint/type/JournalArticle
eprint.statushttp://purl.org/eprint/status/NonPeerReviewed
dc.date.updated2019-09-26T13:41:06Z
dspace.orderedauthorsJohnston, R; Bernauer, J; Cooke, CM; Corliss, R; Epstein, CS; Fisher, P; Friščić, I; Hasell, D; Ihloff, E; Kelsey, J; Lee, S; Milner, RG; Moran, P; Steadman, SG; Vidal, C
dspace.date.submission2019-09-26T13:41:08Z
mit.journal.volume922
mit.licensePUBLISHER_CC
mit.metadata.statusAuthority Work and Publication Information Needed


Files in this item

Thumbnail
Name:
Fisher_Realization of a large.pdf
Size:
810.6Kb
Format:
PDF
Description:
Submitted version
View/Open

This item appears in the following Collection(s)

Show simple item record