Show simple item record

dc.contributor.authorGong, Nan-Wei
dc.contributor.authorWang, Chiu-Yen
dc.contributor.authorParadiso, Joseph A.
dc.contributor.authorGong, Nan-wei
dc.date.accessioned2013-09-11T18:40:31Z
dc.date.available2013-09-11T18:40:31Z
dc.date.issued2012-10
dc.identifier.isbn978-1-4577-1767-3
dc.identifier.isbn978-1-4577-1766-6
dc.identifier.isbn978-1-4577-1765-9
dc.identifier.issn1930-0395
dc.identifier.urihttp://hdl.handle.net/1721.1/80401
dc.description.abstractWe describe the concept of fabricating low-cost sensor tape for fine-grid environmental sensing based on roll-to-roll manufacturing processes. We experiment with constructing sensors and electronic connections with low-cost conductive inkjet printed copper traces. Our first attempt is to fabricate humidity sensors by spin-coating conductive polymer on sensor substrates and integrating the design with an embedded system. The humidity sensor was tested in a two-point probe and exhibits the I-V profile of a diode. We demonstrated a working humidity sensor with an impedance variance of 30 kΩ from 99% to 58% RH within 300 seconds under a 1.4 volt bias.en_US
dc.description.sponsorshipMassachusetts Institute of Technology. Media Laboratoryen_US
dc.language.isoen_US
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)en_US
dc.relation.isversionofhttp://dx.doi.org/10.1109/ICSENS.2012.6411347en_US
dc.rightsCreative Commons Attribution-Noncommercial-Share Alike 3.0en_US
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/en_US
dc.sourceMIT Web Domainen_US
dc.titleLow-cost sensor tape for environmental sensing based on roll-to-roll manufacturing processen_US
dc.typeArticleen_US
dc.identifier.citationGong, Nan-Wei, Chiu-Yen Wang, and Joseph A. Paradiso. “Low-cost sensor tape for environmental sensing based on roll-to-roll manufacturing process.” In 2012 IEEE Sensors, 1-4. Institute of Electrical and Electronics Engineers, 2012.en_US
dc.contributor.departmentMassachusetts Institute of Technology. Media Laboratoryen_US
dc.contributor.departmentMassachusetts Institute of Technology. Responsive Environments Groupen_US
dc.contributor.departmentProgram in Media Arts and Sciences (Massachusetts Institute of Technology)en_US
dc.contributor.mitauthorGong, Nan-weien_US
dc.contributor.mitauthorParadiso, Joseph A.en_US
dc.relation.journal2012 IEEE Sensorsen_US
dc.eprint.versionAuthor's final manuscripten_US
dc.type.urihttp://purl.org/eprint/type/ConferencePaperen_US
eprint.statushttp://purl.org/eprint/status/NonPeerRevieweden_US
dspace.orderedauthorsGong, Nan-Wei; Wang, Chiu-Yen; Paradiso, Joseph A.en_US
dc.identifier.orcidhttps://orcid.org/0000-0002-6399-5776
dc.identifier.orcidhttps://orcid.org/0000-0002-0719-7104
mit.licenseOPEN_ACCESS_POLICYen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record