Study of Factors Governing Oil–Water Separation Process Using TiO[subscript 2] Films Prepared by Spray Deposition of Nanoparticle Dispersions
Author(s)Gondal, Mohammed A.; Sadullah, Muhammad S.; Dastageer, Mohamed A.; McKinley, Gareth H.; Panchanathan, Divya; Varanasi, Kripa K.; ... Show more Show less
MetadataShow full item record
Surfaces which possess extraordinary water attraction or repellency depend on surface energy, surface chemistry, and nano- and microscale surface roughness. Synergistic superhydrophilic-underwater superoleophobic surfaces were fabricated by spray deposition of nanostructured TiO[subscript 2] on stainless steel mesh substrates. The coated meshes were then used to study gravity driven oil–water separation, where only the water from the oil–water mixture is allowed to permeate through the mesh. Oil–water separation efficiencies of up to 99% could be achieved through the coated mesh of pore sizes 50 and 100 μm, compared to no separation at all, that was observed in the case of uncoated meshes of the same material and pore sizes. An adsorbed water on the TiO[subscript 2] coated surface, formation of a water-film between the wires that form the mesh and the underwater superoleophobicity of the structured surface are the key factors that contribute to the enhanced efficiency observed in oil–water separation. The nature of the oil–water separation process using this coated mesh (in which the mesh allows water to pass through the porous structure but resists wetting by the oil phase) minimizes the fouling of mesh so that the need for frequent replacement of the separating medium is reduced. The fabrication approach presented here can be applied for coating large surface areas and to develop a large-scale oil–water separation facility for oil-field applications and petroleum industries.
DepartmentMassachusetts Institute of Technology. Department of Mechanical Engineering
ACS Applied Materials & Interfaces
American Chemical Society (ACS)
Gondal, Mohammed A., Muhammad S. Sadullah, Mohamed A. Dastageer, Gareth H. McKinley, Divya Panchanathan, and Kripa K. Varanasi. “Study of Factors Governing Oil–Water Separation Process Using TiO[subscript 2] Films Prepared by Spray Deposition of Nanoparticle Dispersions.” ACS Applied Materials & Interfaces 6, no. 16 (August 27, 2014): 13422–13429.
Author's final manuscript