Ternary Lead Chalcogenide Alloys for Mid-Infrared Detectors
Author(s)
Su, P.; Pujari, R.; Boodhoo, V.; Aggarwal, S.; Bhattacharya, P.; Maksimov, O.; Wada, Kazumi; Merlo, S.; Bhandari, H. B.; Kimerling, Lionel C; Agarwal, Abhinandan; ... Show more Show less
Download11664_2020_8114_ReferencePDF.pdf (965.1Kb)
Open Access Policy
Open Access Policy
Creative Commons Attribution-Noncommercial-Share Alike
Terms of use
Metadata
Show full item recordAbstract
We demonstrate thin films of PbSe1−xSx and PbSe1−xTex lead chalcogenide ternary alloys as infrared detectors. The films were deposited on single crystal BaF2 substrates using physical vapor deposition. Detectivity in the wavelength range from 1 μm to 5 μm was measured at −40°C, and all films showed photoresponse signals more than an order of magnitude larger than their noise. The detectivity spectra were used to assess the tunability of the band gap from mixing the lead chalcogenide binaries. The PbSe1−xSx system showed tunability that followed Vegard’s law, while the PbSe1−xTex system showed tunability with a bowing parameter of −0.096 eV. Comparisons to measurements from the literature taken at room temperature suggest that the bowing parameter decreases with decreasing temperature, and the band gap temperature coefficient with respect to composition also shows bowing.
Date issued
2020-04Department
Massachusetts Institute of Technology. Department of Materials Science and Engineering; MIT Materials Research LaboratoryJournal
Journal of Electronic Materials
Publisher
Springer Science and Business Media LLC
Citation
Su, P. et al. "Ternary Lead Chalcogenide Alloys for Mid-Infrared Detectors." Journal of Electronic Materials 49, 8 (April 2020): 4577–4580 © 2020 The Minerals, Metals & Materials Society
Version: Author's final manuscript
ISSN
0361-5235
1543-186X